EasyManua.ls Logo

Rcom INSECT MAX 90 - Page 5

Rcom INSECT MAX 90
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
In case that sight glass and water cap weren’t closed completely, temperature and humidity aren’t normally
operated. Therefore, please be careful.
Identification of Parts
View Window
For a clear view of
the incubation process.
(Double Skin Viewing Window)
Water hole
To facilitate water top-up
for the humidity control.
Main Body-1
Main Body-2
Power Connecting (the rear)
For connecting
power cord.
Serial No.
(EX:RCM0000000)
If you register your information with your
machine’s serial number on our web-site
(www.Rcom.co.kr), you can get 2 year
warranty service.
Incubation room? It means the place where the incubator is installed and operated, and as it has much effect on
incubation rate according to the environment of incubation room, it is good to install incubator at the place where
there is little noise and vibration in the vicinity and the temperature range isn’t severe in the temperature of 22~25
(71.6~77). In particular, as there are many cases that the temperature falls rapidly in the nighttime differently
from the daytime, it is necessary to check certainly, and during daytime, incubator must not be exposed directly to
the sunlight.
Before inserting eggs, please start incubation after checking if all functions work without any problem by
operating incubator sufficiently.
In case of moving with water filled, as it may cause a breakdown, fill water after installing it at the place
where you want to incubate.
Please be careful not to give any heavy power or shockon the heater part for humidification in the upper side
of main body as it may be a cause of breakdown. Some foreign substance is created on the heater part
after use, however, there isn’t any problem caused of it. (See cleaning method)
WATER
For circulating warm air
Vents for air circulation(Inside)
For inlet of air
from outside
Air inlet vent
Digital Control Center
See description of
the function and operation.
Locking Button
DIGITAL INCUBATOR
5
1. Introduction
(2) Identification of Parts
and Composition
USA & Canada Official Sales & Service https://www.R-Com-Hatcher.com
Insect Incubator Rcom Max 90 User Manual

Related product manuals