Rcom PRO 50 - Before Using the Incubator; Incubator Assembly and Egg-Turning Plate

110V~120V
Back
%*(*5"-*/$6#"503
43
2. Before use
(1) How to Assemble the Incubator /
Egg-turning plate
How to Assemble
View Window
Egg-Turning Plate
Main Body-1
Main Body-2
▶ If you do not assemble egg turning place correctly,
it can cuase incubator failure.
▶ Gear connecting part of egg turning plate must be
on the top side.
▶ Lock the four locking buttons
at the front and rear of the
incubator.
▶ Insert the power cord in the
socket at the back of the
main body.
Be careful when you assemble egg turning plate.
Gear
connecting part
81'(56,'(
W
A
T
E
R







Standard Tray
Water Cap
* Fit the water cap. * Fit the water cap.
USA & Canada Official Sales & Service https://www.R-Com-Hatcher.com
Egg Incubator Hatcher Rcom USB and Pro 50 User Manual