RCS TBZ48 User Manual

DCN: 141-02071-01 Page 1
Operation Guide
Model TBZ48
Z-Wave Thermostat
Temperature
Setting
Warmer
Cooler
Fan Mode
Selection
Heating/Cooling
Mode Selection
Battery
Compartment
Room Temperature
Setpoints
Backlite Display
Main Thermostat Screen
72H 80C
72H 80C72H 80C
72H 80C
RUN
74
OFF
AUTO
MODE
FAN

RCS TBZ48 Specifications

General

Brand	RCS
Model	TBZ48
Display	LCD
Power Supply	24VAC
Fan Control	Yes

Summary

Setting Heating and Cooling Temperature Setpoints

Adjusting Temperature Setpoints

Instructions on how to change the heating or cooling temperature setpoint using buttons.

Setpoint Separation Rule

Details the 3-degree separation maintained between heat and cool setpoints.

Setting the System Mode

Available System Modes

Emergency Heat Mode (Heat-E)

Navigating Thermostat Menus

Accessing Main Menu Items

Setup Menu Options

System and Z-Wave Configuration

System Menu Configuration Options

Z-Wave Network Installation

Guidance on installing or uninstalling the thermostat into a Z-Wave network.

Thermostat Operation Details

Minimum Run Time (MRT)

Explains the MRT delay for heating/cooling cycles to ensure system longevity.

Minimum Off Time (MOT)

Describes the MOT delay for compressor protection against short cycling.

Z-Wave Network Inclusion and Exclusion

Including TBZ48 in Existing Network

Step-by-step guide to add the TBZ48 to an existing Z-Wave network.

Excluding TBZ48 from Network

Instructions on how to remove the TBZ48 from a Z-Wave network.