RDS Technology Apollo FYM

To Next Page

To Previous Page

APOLLO FYM - SPREADER CONTROLLER

4. PRODUCT SETUP 13

4.1 Product Select............................................................................................................................. 13

4.1.1 Product Name 13

4.1.2 Rate 13

4.1.3 ‘T’ Factor 13

4.1.4 Speed Range 13

4.1.5 T Store Point 13

4.1.6 Fast Empty Point 13

5. SPREADER SETUP 14

5.1 Working Width ............................................................................................................................. 14

5.1.1 Set current Working Width 14

5.2 Forward Speed Sensor................................................................................................................ 14

5.2.1 Select Sensor Option 14

5.2.2 Wheel sensor calibration – ‘Autocal’ 14

5.2.3 Wheel sensor calibration - manually calculating the Forward Speed Factor 15

5.2.4 Radar Sensor 15

5.2.5 RDS ‘Satspeed’ Interface / NMEA VTG Input 16

5.3 Pre-Start....................................................................................................................................... 16

6. ALARMS 16

6.1 Setting the Alarm thresholds ...................................................................................................... 16

6.1.1 Low / High RPM Alarm 16

6.1.2 LOW Weight Alarm 16

7. GENERAL PF SETUP 16

RDS Technology Apollo FYM - Page 4

Table of Contents