RDS Technology Apollo FYM User Manual

APOLLO FYM - SPREADER CONTROLLER
3
INTRODUCTION 5
The "Setup" Screen page ......................................................................................................................... 5
Calibration on installation 5
Calibration in normal use 5
Data Entry................................................................................................................................................. 5
1 USER OPTIONS 6
1.1 Set Time and Date ....................................................................................................................... 6
1.2 Adjust Screen Contrast and Brightness ..................................................................................... 6
1.3 Customise.................................................................................................................................... 6
1.3.1 Nudge Step Size 7
1.4 Select Language.......................................................................................................................... 7
1.5 Select Control Software .............................................................................................................. 7
2. TECHNICIAN CONFIG 8
2.1 Display Options ........................................................................................................................... 8
2.1.1 Speed Smoothing Factor 8
2.1.2 Rate Lock-On 8
2.1.3 Rate Smoothing 8
2.1.4 Off Target Alarm 8
2.1.5 Info Weight 8
2.2 Loadcell Correction .................................................................................................................... 9
Correction Span 9
Min Stat Weight 9
Dynamic Time 9
Dynamic Weight 9
Start Delay 9
Steady Weight 9
H’Land Delay 9
T Factor Delay 9
T Store Mode 9
Dyn Fill Weight 9
Dyn Min Weight 9
T Store Auto 9
Corr Span Fast 9
2.3 Print Calibration Data.................................................................................................................. 10
2.4 Change PIN for Technician Menu............................................................................................... 10
3. FACTORY CONFIG 11
3.1 Machine Options ......................................................................................................................... 11
3.2 Spreader Config .......................................................................................................................... 11
3.3 Pro-Series Config ........................................................................................................................ 11
Area Cut Out Input 11
3.4 Channel Setup ............................................................................................................................. 11
3.4.1 Feedback 12
3.4.2 Response 12
3.4.3 Deadband 12
3.4.4 Startup Delay 12
3.5 Change PIN for Factory Configuration Menu ............................................................................. 12

RDS Technology Apollo FYM Specifications

General

Brand	RDS Technology
Model	Apollo FYM
Category	Controller
Language	English