To Next PageTo Next Page
Need help?Do you have a question about the RDS CMM 100 and is the answer not in the manual?
General| Brand | RDS |
|---|---|
| Model | CMM 100 |
| Category | Measuring Instruments |
| Language | English |
Describes the intended use and basic functionality of the CMM100 moisture meter.
Explains the need for calibration and default crop type assignments for channels.
Covers powering on the device, initial display, and selecting the correct crop type.
Details how to adjust the moisture reading using correction factors.
Explains how to view grain temperature and adjust its display.
Details the high and low moisture content alarms for harvesting and drying.
Guides on setting specific high/low moisture content thresholds for alarms.
Instructions on entering and navigating the calibration mode menus.
Step-by-step guide to editing calibration settings and entering negative values.
Details on adjusting calibration factors A, B, C, and other thresholds.
Explanation of the display smoothing factor and its effect on readings.
Explains how to enter diagnostic mode and lists available diagnostic functions.
Instructions for connecting the 'Wizard Upload Lead' for data capture.
Defines the fields and format of the data output line.
Lists all components included in the CMM100 installation kits.
Details on mounting the head unit and terminator box within the vehicle cab.
Guidance on positioning and securing the head unit using the mounting kit.
Instructions for connecting the 12V/24V power supply to the system.
Explains the wiring and connections for the Terminator junction box.
Information on installing the Mk 4 Moisture Sensor Kit.
Instructions for fitting and connecting an optional external alarm.
Steps to test the installation after assembly and connection.
