To Next Page

To Previous Page

Re S.p.A. WG251 SKB-C RESMART

22/11/12 6/25

Attention!

To ensure this instrument functions correctly, wait for at least 5 seconds between

switching it off and switching it on again.

Important!

Use shielded power supply cables only, and connect the shield to the earth point

located on the MWG10 unit. The earth point (represented in the drawing), must be

connected to the machine frame by a cable, that must be as short as possible; the

cable section must be 6mm

minimum.

Questions and Answers:

Need help?

Do you have a question about the Re WG251 SKB-C RESMART and is the answer not in the manual?

Re WG251 SKB-C RESMART Specifications

General