Re T-two - User Manual

.ENG.
T-two
Tension control with load cells or dancer roll
USER’S MANUAL

Re T-two Specifications

General

Analog Sticks	2
Weight	220g
Compatibility	PC
Connection	Bluetooth, USB
Vibration	Yes
Special Features	Turbo function

Summary

Warnings

Regulator Setup

Regulator Parameters Details

Function 1: Torque in STOP State

Sets the percentage of torque applied to the reel when the machine is stationary.

Function 3: Proportional Regulator in AUTO State

Adjusts the proportional parameter for faster system response in AUTO state.

Function 4: Integral Regulator in AUTO State

Modifies the integral parameter to improve error correction speed in AUTO state.

Function 5: Derivative Regulator in AUTO State

Function 7: Proportional Regulator in ACC State

Function 8: Integral Regulator in ACC State

Function 9: Derivative Regulator in ACC State

Function 12: Proportional Regulator in DEC State

Function 13: Integral Regulator in DEC State

Function 14: Derivative Regulator in DEC State

Function 16: Proportional Regulator in STOP State

Function 17: Derivative Regulator in STOP State

Function 18: Tension;Position Setpoint

Configures the desired material tension or dancer roll position setpoint.

Function 19: Torque in EMERGENCY State

Function 33: Tension;Position Alarms Mode

Configures how tension or position alarms are activated based on thresholds.

Function 34: Alarm 1 Threshold

Sets the first alarm threshold for tension or position.

Function 35: Alarm 2 Threshold

Sets the second alarm threshold for tension or position.

Function 97: Enter Admin Password

Enables access to restricted settings by entering the Admin password.

Function 98: Save Admin Password

Allows saving a new Admin password to protect regulator settings.