To Next Page

To Previous Page

Re S.p.A. T-two – standard model

Rev. 05/15 10/14

dedicated remote command as described in Remote control of the states by PLC on page 4.

Press  to access the function, the display indicates the corresponding value.

Press + / – to set-up the desired torque value, expressed as a percentage.

Press  to confirm.

Function 32 – Dancer roll air pressure (%)

If the transducer that supplies the air to the dancer roll piston has been connected to the T-two unit via

the dedicated analogue control output, you can use this function to set-up the air pressure and hence

the material tension (as a percentage).

Press  to access the function, the display indicates the corresponding value.

Press + / – to set-up the desired pressure value, expressed as a percentage.

Press  to confirm.

Function 33 – Tension/Position alarms mode

You can use this function to configure how the tension/position alarms are activated.

N.B.: The hysteresis effect on the alarms thresholds is 3%.

Press  to access the function, the display indicates the currently selected activation mode.

Press + / – to select the desired activation mode:

 OFF: both alarms are deactivated

 A-b: Alarm 1 is activated when the tension (or the position) exceeds the alarm 1 threshold (F.34)

whereas Alarm 2 is activated when the tension (or the position) falls below the alarm 2 threshold

(F.35)

 b-A: Alarm 1 is activated when the tension (or the position) falls below the alarm 1 threshold (F.34)

whereas Alarm 2 is activated when the tension (or the position) exceeds the alarm 2 threshold

(F.35)

 A-A: Alarm 1 is activated when the tension (or the position) exceeds the alarm 1 threshold (F.34)

whereas Alarm 2 is activated when the tension (or the position) exceeds the alarm 2 threshold

(F.35)

SECOND ALARM THRESHOLD (F.35)

FIRST ALARM THRESHOLD (F.34)

SECOND ALARM THRESHOLD (F.35)

FIRST ALARM THRESHOLD (F.34)

SECOND ALARM THRESHOLD (F.35)

FIRST ALARM THRESHOLD (F.34)

SECOND ALARM THRESHOLD (F.35)

ALL. 1ALL. 1 + ALL. 2ALL. 2

ALL. 2

ALL. 1

ALL. 1 ALL. 1 + ALL. 2

ALL. 1 + ALL. 2

SECOND ALARM THRESHOLD (F.35)

FIRST ALARM THRESHOLD (F.34)

SECOND ALARM THRESHOLD (F.35)

FIRST ALARM THRESHOLD (F.34)

SECOND ALARM THRESHOLD (F.35)

FIRST ALARM THRESHOLD (F.34)

SECOND ALARM THRESHOLD (F.35)

ALL. 1ALL. 1 + ALL. 2ALL. 2

ALL. 2

ALL. 1

ALL. 1 ALL. 1 + ALL. 2

ALL. 1 + ALL. 2

SECOND ALARM THRESHOLD (F.35)

FIRST ALARM THRESHOLD (F.34)

SECOND ALARM THRESHOLD (F.35)

FIRST ALARM THRESHOLD (F.34)

SECOND ALARM THRESHOLD (F.35)

FIRST ALARM THRESHOLD (F.34)

SECOND ALARM THRESHOLD (F.35)

ALL. 1ALL. 1 + ALL. 2ALL. 2

ALL. 2

ALL. 1

ALL. 1 ALL. 1 + ALL. 2

ALL. 1 + ALL. 2

Brand	Re
Model	T-two
Category	Controller
Language	English

Re T-two User Manual

Table of Contents

Questions and Answers:

Re T-two Specifications

Related product manuals