Ready Remote 24927 - Page 47

44
© 2006 Directed Electronics
2. Passive: The doors will lock when armed via transmitter,
Passive Arming and Auto Re-arming.
3. Ignition Locking: Selects if the door locks will activate after an
ignition input is sensed.
1. Off: The Door Lock output will not activate due to an
ignition input sense.
2. On: The Door Lock output will activate when the brake
input and an ignition input is sensed.
4. Ignition Unlocking: Selects if the door locks will activate after
the ignition input ceases.
1. Off: The Door Unlock output will not activate when the
ignition input ceases.
2. On: The Door Unlock output will activate 100mS after
the ignition is turned off.
5. Lock Pulses: Selects the number of pulses when locking the
doors.
1. 1 pulse: The Door Lock output will be one pulse for the
programmed duration.
2. 2 pulses: The Door Lock output will be 2 pulses for the
programmed duration.
6. Unlock Pulses: Selects the number of pulses when Unlocking the
doors.
1. 1 pulse: The Door Unlock output will be a single pulse
for the programmed duration.
2. 2 pulses: The Door Unlock output will be a double pulse
for the programmed duration.