EasyManua.ls Logo

Ready Remote 24927 - Page 48

Default Icon
79 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
45
© 2006 Directed Electronics
7. Lock Duration: Selects the duration of the pulses when Locking
and Unlocking the doors.
1. Short pulse: The Door Lock & Unlock outputs will be
800mS in duration.
2. Long pulse: The Door Lock & Unlock outputs will be a
3.5 seconds in duration.
8. Alarm Mode: Selects if the alarm functions are active or
bypassed.
1. On: Alarm functions are operational as described
2. Off: Alarm functions are NOT operational, but conve-
nience features and Remote Starter still operate
normally.
9. Auto Re-arming: Selects if the units will automatically Re-
arm/lock itself if alarm inputs 1 or 6 are not activated after trans-
mitter disarm/unlock.
1. Off: The unit WILL NOT automatically Arm/Lock the
doors after transmitter Disarm/Unlock.
2. On: The unit will automatically Arm/Lock the doors 120
seconds after transmitter Disarm/Unlock if Alarm Inputs
1 or 6 remain idle.
10. Alarm Chirps: Selects if the "Blue" Horn output wire will pulse
when Arm/Lock and Disarm/Unlock are activated.
1. On: The Horn output will pulse 1 time for Arm/Lock and
2 times for Disarm/Unlock.
2. Off: The Horn output WILL NOT pulse for Arm/Lock or
Disarm/Unlock.

Related product manuals