Technical data
The Circuitry
SAFETY DEVICES
The unloader valve can reduce pressure if it
exceeds pre-set values.
Locking device on trigger gun (see illustration at
the beginning of this manual)! The trigger gun
features a locking device. When the knob is
activated, the trigger gun cannot be operated.
THERMAL SENSOR
A thermal sensor protects the motor against
overloading. The machine will restart after a few
minutes when the thermal sensor has cooled.
Assembly
1. Position the washer as CLOSE as possible
to the water supply.
2. The washer must be used on a secure and
stable surface in a standing, upright position
(Fig. 1).
3. Screw the transaction handle to the electric
pressure washer unit(Fig. 2).
To Next Page
Loading...
