REALINN RL6200 - Case Sensitivity Setting; Restore factory setting

9
5. Case Sensitivity Setting
The scanner can change all the letter cases of barcode into uppercase or lowercase.
It takes“Not Altering the Letter Case of barcodes”as default, letter case of barcodes
can be altered through scanning correspondent bar code below.
Note: Please deactivated caps lock on keyboard first.
** Scan one of the following code to select the letter case
All upper case
All lower case
No transformation（default）
6.Restore factory setting
To set the scanner back to factory setting, please scan the following code:
Restore default code