Follow these steps to clear a memory.
1. Press PR or MR and select the memory you want to clear.
2. Press F+M-CLR to clear the settings stored in the current memory.
NOTE: You cannot clear Standard Memory 1 or the calling-frequency
memory.
You can only change the settings for these memories.
MOVING A MEMORY CHANNEL TO THE MANUAL MODE
Follow these steps to quickly move a memory channel to the manual (VF)
mode.
1. Select the memory channel.
2. Press F+M-VFO.
All settings for the selected memory move to the VF mode.
REVIEWING PROGRAMMED OPTIONS
Follow these steps to view the transmit frequency and subaudible tone
settings for a memory or the tuned VF frequency.
1. Press CA, PR, MR, or VF and select the memory or frequency you want to
check.
2. If you want to check the subaudible tone settings, press F+T-SQl so
that T-SQL appears on the display.
3. Press M (located above PTT). The transceiver's squelch opens, and the
display shows the transmit frequency for about 1 second, followed by
the subaudible transmit tone and the subaudible receive tone.
UNDERSTANDING THE CONFIGURATION MENU
To Next Page
Loading...
