---------------- ----------------
| tc oFF | | rc oFF |
---------------- ----------------
To set a subaudible transmit tone, follow the steps in "Understanding
Configuration Menu" to display tc. Then, rotate TUNE to select the
subaudible tone. If you do not want to transmit a subaudible tone, rotate
TUNE to select OFF.
To set a subaudible receive tone, follow the steps in "Understanding the
Configuration Menu" to display rc. Then, rotate TUNE to select the
subaudible tone. If you do not want to use the receive subaudible tone
squelch, but are using transmit subaudible tone to activate a repeater,
rotate tune to select OFF. Otherwise, you only hear transmissions that
have the correct subaudible tone when you activate tone squelch.
To turn on the subaudible tone feature, press F+T-SQL. When you transmit,
the transceiver includes the subaudible tone in the signal. To receive,
the incoming signal must have the correct subaudible tone. You can
override the default subaudible tones for any memory.
Code Freq.(Hz) number of clicks XZ 67.0 1.
XA 71.9 2.WA 74.4 3XB 77.0 4WB 79.7 5YZ
82.5 6YA 85.4 7YB 88.5 8ZZ 91.5 9ZA 94.8
101Z 100.0 111A 103.5 121B 107.2 132E 110.9
142A 114.8 15 2B 118.8 163Z 123.0 173A 127.3
183B 131.8 194Z 136.5 204A 141.3 214B 146.2
225Z 151.4 235A 156.7 24
5B 162.2 25
6Z 167.9 26
6A 173.8 27
6B 179.9 28
7Z 186.2 29
7A 192.8 30
M1 203.5 31
M2 210.7 32
M3 218.1 33
To Next Page
Loading...
