AUTOMATICALLY SENDING A DTMF REPLY
You can set your transceiver to automatically transmit the touch-tone digit
(#) when you have enabled DTMF squelch and the transceiver receives the
correct touch-tone sequence. To turn on the DTMF auto-reply, follow the
steps in "Understanding the Configuration Menu" to display Ar. Then,
rotate TUNE to select on.
You should also set this option to on if you expect an auto reply from an
auto patch or another HTX-202 or other transceiver that has this feature.
Care and Maintenance
Your HTX-202 2-Meter Handheld Transceiver is an example of superior
design
and craftsmanship. The following suggestions will help you care for your
transceiver so that you can enjoy it for years.
Keep the transceiver dry. If it does get wet, wipe it dry immediately.
Liquids can contain minerals that can corrode the electronic circuits.
Use and store the transceiver only in normal temperature environments.
Temperature extremes can shorten the life of electronic devices and
distort or melt plastic parts.
Handle the transceiver gently and carefully. Dropping it can damage
circuit boards and cases and can cause the transceiver to work
improperly.
Keep the transceiver away from dust and dirt, which can cause premature
wear of parts.
Wipe the transceiver with a dampened cloth occasionally to keep it
looking new. Do not use harsh chemicals, cleaning solvents, or strong
detergents to clean the transceiver.
Modifying or tampering with your transceiver's internal components can
cause a malfunction and might invalidate its warranty and void your FCC
To Next Page
Loading...
