EasyManua.ls Logo

Realtek RTL8187SE - Page 22

Default Icon
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22
802.11g/b
3. 802.11b Preamble Mode
Long: higher quality but with lower performance than preamble short
mode
Short: Normal quality but with higher performance then preamble long
mode.
Auto: use the preamble mode of current BSS.
4. Fragment Threshold
The threshold of fragment length. Higher threshold increase data
transition performance with good signal quality. However, in a poor signal
quality environment, data throughput might be worser on high fragment
threshold than low fragment threshold.
5. RTS Threshold
Threshold of Request To Send mechanism. The RTS frame will not send
out until the packet size over threshold.
6. WOL (Wake On LAN)
The wake-on-LAN is applied for remote control purpose. You could wake
up a system through network packets. For Realtek RTL8187SE Wireless
LAN MINI CARD Adapter, only the same adapter on another system could
wake it up.
Input MAC Address: the six two-digit numbers of Realtek
RTL8187SE Wireless LAN MINI CARD Adapter on target system.
Wake Up: press this button to wake it up
7. Set Defaults
Restore the default value to be current setting
8. Apply
Apply the current setting to GUI

Related product manuals