RECO SensorLine RM-DPC Micro FP - Technical Specifications

RM-DPC Micro FP Documentation
RDN 10000531 15 13.05.2013
10 Technical specifications
RM-DPC 5000 Micro FP
RM-DPC 10000 Micro FP
∆P measuring range
Full scale output configurable from
1000 Pa ... 5000 Pa
in 500 Pa increments
For the range 1000 Pa ... 5000 Pa
the full scale output is configurable
in 500 Pa increments
For the range 5000 Pa ... 10000 Pa
the full scale output is continuously
configurable.
Full scale output
(FSO)
5000 Pa
10000 Pa
Measuring sensor
Piezoresistive, overpressure-proof up to 138 kPa
Accuracy
(linearity and hysteresis)

± 1 % FSO
Supply voltage
24 V … 30 V DC
Power consumption
max. 5 W
Signal input
4-20 mA to connect an external differential pressure sensor
Signal outputs
Relay outputs (change-over contact), potential-free
max. contact load:
250 V AC, 10 A
50 V DC, 1,5 A / 30 V DC, 10 A (ohmic load)
Output 4-20 mA / 0-20 mA
4-20 mA corresponding to 0 ... x Pa*; resistance  600 Ohm
0-20 mA corresponding to 0 ... x Pa*; resistance

600 Ohm
Output 2-10 V / 0-10 V
2-10 V corresponding to 0 ... x Pa*
0-10 V corresponding to 0 ... x Pa*
Fuse
T 1 A, 250 V, 5 x 20 mm
Temperature range
- 20°C to + 60°C
Protection rating
IP-20
Dimensions
See section 3 "Assembly"
Weight
approx. 250 g
Installation height
max. 3000 m above M.S.L.
*
set full scale output