Red Kite Push Me Pace i - Car Seat Attachment and Detachment; Car Seat Adaptors; Car Seat Assembly; Car Seat Detachment

19
20
17
18
WARNING
To attach and detach the car seat from the stroller chassis
Assembly Steps
17.Insert the adaptors onto the pushchair frame until they click in place. Pull each adaptor
upwards to ensure they’re locked in place. Fig 17.
Detachment Steps
19. To release the car seat from the adaptors, press each of the release buttons and lift
the car seat upwards. Fig 19.
20. To release the adaptors from the pushchair frame, press in the button on each adaptor
and pull upwards. Fig 20.
18. Lower the car seat gently onto the adaptors. Press the adaptor install/release button and
simultaneously press the car seat down until it clicks in place. Repeat for the other side. Try
to lift the car seat off the frame with the handle to ensure it’s fully locked in place. Fig18.
Please ensure all of the locking devices are in locked positions, before use.
WARNING Check that the car seat attachment devices are correctly engaged
before use.
This vehicle does not replace a cot or a bed, should your child need to sleep, then
it should be placed in a suitable pram body, cot or bed.
Parts
Car Seat
Unlock
button
NOTE. You
may remove
the car seat
with the
adapters and
leave them in
situ on the car
seat if required.
Adaptors x 2
Install / release
Button