red lion IAMS0002 - Input Specifications; Basic Input Values; RTD and Potentiometer Inputs

LP1109 15
Basic values
Input
type
Basic
accuracy
Temperature
coefficient
mA ≤ ±4 µA ≤ ±0.4 µA / °C
Volt ≤ ±20 µV ≤ ±2 µV / °C
Pt100 ≤ ±0.2°C ≤ ±0.01°C / °C
Linear resistance ≤ ±0.1 Ω ≤ ±0.01 Ω / °C
Potentiometer ≤ ±0.1 Ω ≤ ±0.01 Ω / °C
TC type:
E, J, K, L, N, T, U ≤ ±1°C ≤ ±0.05°C / °C
TC type: R, S, W3,
W5, LR ≤ ±2°C ≤ ±0.2°C / °C
TC type: B
85...200°C
≤ ±4°C ≤ ±0.4°C / °C
TC type: B
200...1820°C
≤ ±2°C ≤ ±0.2°C / °C
Auxiliary supplies:
2-wire supply (terminal 44...43) ........................ 25...16 VDC / 0...20 mA
RTD, linear resistance and potentiometer input
Input for RTD types:
Pt10, Pt20, Pt50, Pt100, Pt200, Pt250, Pt300, Pt400, Pt500, Pt1000
Ni50, Ni100, Ni120, Ni1000, Cu10, Cu20, Cu50, Cu100
Input
type
Min.
value
Max.
value Standard
Pt10...Pt1000
Ni50...Ni1000
Cu10...Cu100
Lin. R
Potentiometer
-200°C
-60°C
-200°C
0 Ω
10 Ω
+850°C
+250°C
+260°C
10000 Ω
100 kΩ
IEC 60751
DIN 43760
α = 0,00427
-
-
Cable resistance per wire (max.), RTD............. 50 Ω
Sensor current, RTD ................................................ Nom. 0.2 mA
Effect of sensor cable resistance
(3- / 4-wire), RTD ..................................................... < 0.002 Ω / Ω
Sensor error detection, RTD ................................ Ye s
Short circuit detection, RTD ................................ < 15 Ω
EMC immunity influence .................................................. < ±0.5% of span
Extended EMC immunity:
NAMUR NE 21, A criterion, burst ................................. < ±1% of span