red lion IAMS0002 - Output and Approval Specifications; Current and Voltage Output; Relay Output Functions; Ex;I.S. Approval and Standards

LP1109 17
Current output
Signal range (span) ................................................. 0...20 mA
Programmable signal ranges ............................... 0...20 / 4...20 / 20...0 / 20...4 mA
Load (max.) ................................................................. 20 mA / 800 Ω / 16 VDC
Load stability ............................................................. ≤ 0.01% of span / 100 Ω
Sensor error detection ........................................... 0 / 3.5 / 23 mA / none
NAMUR NE 43 Upscale / Downscale ............... 23 mA / 3.5 mA
Output limitation:
on 4...20 and 20...4 mA signals ..................... 3.8...20.5 mA
on 0...20 and 20...0 mA signals ..................... 0...20.5 mA
Current limit ............................................................... ≤ 28 mA
Voltage output
Signal range ............................................................... 0...10 VDC
Programmable signal ranges ............................... 0...1 / 0.2...1 / 0...10 / 0...5 / 1...5 /
2...10 / 1...0 / 1...0.2 / 5...0 / 5...1 /
10...0 and 10...2 V
Load (min.) .................................................................. 500 kΩ
Ex / I.S. approval
FM, applicable in ....................................................... Class I, Div. 2, Group A, B, C, D
Class I, Div. 2, Group IIC
Zone 2
Max. ambient temperature for T5 .................... 60°C
Relay outputs
Relay functions ......................................................... Setpoint, Window, Sensor error,
Latch, Power and Off
Hysteresis ................................................................... 0...100%
On and Off delay ...................................................... 0...3600 s
Sensor error detection ........................................... Break / Make / Hold
Max. voltage .............................................................. 250 VRMS
Max. current ............................................................... 2 A / AC or 1 A / DC
Max. AC power .......................................................... 500 VA
Observed authority requirements Standard
EMC 2004/108/EC .................................................. EN 61326-1 (IAMS0002)
EMC 2014/30/EU ..................................................... EN 61326-1 (IAMS 0022 / 0020)
LVD 2006/95/EC ...................................................... EN 61010-1 (IAMS0002)
LVD 2014/35/EU ..................................................... EN 61010-1 (IAMS 0022 / 0020)
FM .................................................................................. 3600, 3611, 3810 and ISA 82.02.01
UL, Standard for Safety ......................................... UL 508
of span = of the currently selected measurement range