Red Sea MAX NANO G2 - Adding Optional Devices

Red Sea MAX
®
NANO
22
NOTE: If the pump makes mechanical noise after cleaning, replace
the impeller. The impeller is a wear item and may need to be
replaced periodically.
Water temperature control
For optimum conditions a reef aquarium should be maintained at a stable
water temperature in the range of 24-28°C / 76-82°F (the stability of
the temperature being more important than the exact value). Slightly
higher temperatures can be tolerated for short periods of time as long
as the change in temperature is steady and not sudden. Monitor the
temperature at least twice a day, looking for dramatic fluctuations.
Avoid temperature differences of more than 2°C / 7°F during the day.
During season changes and when heating or cooling the house, monitor
the tank temperature more frequently.
Change the carbon filter
Replace the active carbon filter every two months.
14 Adding Optional Devices
NanoMat
Remove the filter bag holder
and follow the installation
instructions provided with the
NanoMat.