32
10 - LOADING THE PELLETS
CONFIGURATION OF PROGRAMMED MODE (TIMER) - Main menu
The current time and date must be congured to ensure correct operation of the timer.
There are six congurable TIMERS; for each one, the user can select a start and stop time and the days of the week when it is in use.
When one or more programs are active, the status of the stove and the TIMER "n" alternate on the display. "n" is the number of timer
programs in use, separated by dashes.
Example:
TIMER 1 Timer 1 program active.
TIMER 1-4 Timer 1 and 4 programs active.
TIMER 1-2-3-4-5-6 All timer programs active.
EXAMPLE OF PROGRAMMING
With the stove on or o:
• access the MENU,
• scroll to the TIMER item using the <> arrows,
• press the "Menu" key
• the system shows "P1" (Press the <> keys to move through the timers P2, P3, P4, P5, P6)
• Press the "Menu" key to activate "P1".
• press + - and select "ON"
• press the "Menu" key to conrm
At this point the start time is 00:00. Press the + - key to set the start time and press the "menu" key to conrm.
Next, the proposed stop time is 10 minutes later than the congured start time: press the + key and edit the stop time, and press the
"menu" key to conrm.
Next, you are asked to set the days of the week when the congured timer is to be enabled or disabled. Press the - or + keys to select the
day you want to activate the time. It will light up white, then conrm with the "menu" key. If no day is selected for enabling the timer, the
timer program is no longer enabled on the status window.
Next, program the other days or press "ESC" to exit. Repeat this procedure to program the other timers.
EXAMPLES OF PROGRAMMING
P1
P2
on o day on o day
08:00 12:00 mon 11:00 14:00 mon
Stove on between 08:00 and 14:00
P1 P2
on o day on o day
08:00 11:00 mon 11:00 14:00 mon
Stove on between 08:00 and 14:00
P1 P2
on o day on o day
17:00 24:00 mon 00:00 06:00 tue
Stove on between 17:00 on Monday to 06:00 on Tuesday
To Next Page
Loading...
