33
Technical Dept. - All rights reserved - Reproduction is prohibited
10 - LOADING THE PELLETS
NOTES ON USE OF THE TIMER
• The timer always starts the boiler with the last temperature and ventilation settings (or with the default settings at 20°C and V3 if
they have never been altered).
• The start time can be between 00:00 and 23:50
• If the stop time has not yet been saved, the program proposes a start time at +10 minutes.
• If a timer program turns o the stove at 24:00 on one day and another program starts it up at 00:00 on the next day: the stove
remains on.
• A program has a start-up and/or shut-down time that overlap the times of another program: if the stove is already on, the start has
no eect while OFF turns o the stove.
• When the stove is on and the timer is active, pressing the OFF key turns o the stove; the stove then restarts automatically at the
next time of the timer.
• When the stove is o and the timer is active, pressing the ON key turns on the stove; the stove then stops automatically at the next
time of the timer.
SLEEP FUNCTION (main menu)
Sleep may be activated only when the stove is on and allows you to quickly set a time for the product to turn o.
To set the Sleep function, proceed as follows:
• Enter the MENU
• Scroll to the SLEEP item with the <> arrows
• Press Menu
• Set the turn-o time you want using the + and - keys.
The panel shows a default time of 10 minutes after the current time, which can be adjusted with key 6 up to the following day (i.e. the
turn-o can be delayed for a maximum of 23 hours and 50 minutes).
If the SLEEP function is active with the TIMER active, the former has priority, therefore the stove will not turn o at the time set in the timer
program but at the time set by the sleep function, even if it comes after the time set by the timer.
To Next Page
Loading...
