P5 P1
34
10 - LOADING THE PELLETS
OPERATING MODE
ADJUSTMENTS MENU
"Adjustments" menu settings determine the operation mode of the stove.
To access the menu, proceed as follows:
• Press the - + keys
• Scroll with the <> arrows and select "Set Amb. T" or "Set Ventilation T" or "Set Flame"
• Press "menu" to enter the option selected.
• Change with the + - keys.
• Press "menu" to conrm and "esc" to exit.
Set Amb. T - this function allows you to set the temperature you want to reach in the room where the stove is installed, from a minimum
of 5°C to a maximum of 35°C. When the said temperature is reached, the stove places itself in a status that is equivalent to the minimum
consumption values (minimum ame and hot air fan speed) to then start again when the set room temperature goes below the set
threshold.
PLEASE NOTE: The point to the right of the room temperature on the control panel display indicates the half degrees (e.g. 23.°C is
equivalent to 23.5°C).
Set Vent. - this function allows you to select the desired speed of the room fan from 1 to 5.
Flame Set - this function allows you to set the power of the ame from a minimum of 1 to a maximum of 5. The power levels correspond
to a dierent value of fuel consumption, setting 5 heats the room in less time and setting 1 can keep the room temperature stable for a
longer period of time. The set ame is automatically set to a minimum when the set temperature value is reached.
if the bars are all full, the stove is on ame power 5
if only one bar is full, the stove is on ame power 1
if the bars are ashing, automatic cleaning is in progress
To Next Page
Loading...
