C OPYRIGHT © 2 019 R ED.C OM , LLC 95 5-0 05 0, REV-L | 17
RED FOCUS OPERATION GUIDE
CHAPTER 6:
RED FOCUS MAINTENANCE
All RED
®
products are designed for rugged durability, but precision instruments demand proper care. Follow the
instructions in this chapter to clean, maintain, and store the RED Focus.
WARNING: DO NOT rinse or immerse the RED Focus in water. Keep dry at all times.
WARNING: DO NOT use soaps, detergents, ammonia, acetone, alkaline cleaners, abrasive cleaning compounds, or
solvents. These substances may damage lens coatings and electronic circuitry.
WARNING: DO NOT attempt to modify, dismantle, or open your RED Focus as doing so may expose you to electric
shock and serious injury. There are no user-serviceable parts inside. Alteration or repairs made to the RED Focus,
except by a RED authorized service facility, voids all warranties.
CLEAN RED FOCUS EXTERIOR SURFACES
Use a filtered, non-residue gas duster to clean the exterior of the RED Focus.
Clean with a damp, lint-free cloth. When cleaning your RED Focus, remember that the device is not waterproof and
moisture can damage electronic circuitry.
STORE RED FOCUS
WARNING: DO NOT store the RED Focus in any place with extreme temperatures, direct sunlight, high humidity,
severe vibration, or strong magnetic fields.
WATER DAMAGE
If your RED Focus has come in contact with water or you suspect water damage, submit a Support ticket at
https://support.red.com immediately.
WARNING: DO NOT attempt to power any device that may have water damage.
WARNING: DO NOT place the device in a container of rice, silica gel, or desiccant packets in an attempt to dry
the device.
To Next Page
Loading...
