KEYMAP selects the Key Map Preferences sub-menu. This menu permits selected menus or
functions to be mapped to specific User Keys on the camera body.
Side Record: When checked, the side RECORD key is enabled. Default is enabled – Record
USER KEYS: When pressed permits USER KEYS 1 thru 5 to be programmed.
User-1: When checked USER-1 key is enabled, and its function is defined in the associated
list. Default is Enabled - Auto WB. User Key 1 is the upper user key on the camera side.
User-2: When checked USER-2 key is enabled, and its function is defined in the associated
list. Default is Enabled - Magnify. User Key 2 is the lower user key on the camera side.
User-3: When checked USER-3 key is enabled, and its function is defined in the associated
list. Default is enabled – Assist. User Key 3 is the upper user key on the RED-EVF
User-4: When checked USER-4 key is enabled, and its function is defined in the associated
list. Default is enabled – Meter. User Key 4 is the lower user key on the camera side.
User-5: When checked USER-5 key is enabled, and its function is defined in the associated
list. Default is enabled – Meter. User Key 5 is the left hand side key on the RED-LCD
Available functions that may be allocated to the User Keys are –
Record Initiates camera record start / stop
Magnify Initiates camera monitor path magnify function
Auto WB Initiates camera Auto White Balance
Color Toggles the EVF Color selection On/Off
View RAW Toggles VIEW RAW selection On/Off
Meter Toggles the EVF Meter Assist selection On/Off
Ramp Initiates Variable Speed Ramp
To Next Page
Loading...
