To Next Page

To Previous Page

Nov 12 2008 Copyright RED Digital Cinema

WRITE LOG: select to write camera’s .LOG file to CF card or RED-DRIVE magazine. The .LOG

file is a diagnostic tool that can assist RED with camera troubleshooting. After capture, upload

the .LOG file to the RED customer service team contactable at www.red.com/support

REMOTE: This menu provides access to controls that specify the operation of the remote

ports on the camera. At this time there is a single selection - S4/I.

S4/i

Check the S4/i box to enable communication between the RED ONE and an S4/i compatible

lens, and to enable recording of the lens data as metadata in the RED ONE .R3D files.

To enable the display of Focus / Zoom / Iris data from the S4/i lens, also check the LENS DATA

checkbox located in SYSTEM / SETUP / PREFERENCES / DISPLAY menu.

Note: S4/i communications requires appropriate hardware to be present in the camera

body and P/L lens mount. Cameras shipped prior to Sept 15 2008 will require a factory

installed hardware upgrade to enable this function.

Other manuals for RED ONE

Questions and Answers:

Need help?

Do you have a question about the RED ONE and is the answer not in the manual?

General