Redarc MANAGER 30 User Manual

3 USER GUIDE
3.5 BMS Settings
BMS Settings
When a Battery Management System is connected, the system will allow setup and
modification of a number of BMS settings as outlined below.
This icon will return to the Home Screen
This icon links to the Battery Information screen. This screen allows the
user to set their battery type and size. This information is critical for the
operation of the Manager product so it is important to ensure this is correct
This icon links to the Charger Settings screen. This screen allows setting
of the DC input trigger on the Manager and allows modification of the Low
Voltage and SoC alarm levels.
This icon links to the BMS Load Disconnect screen. This allows for setting
of the Load Disconnect feature on the Manager.
NOTE: This feature operates similarly but independently to the Distribution
Box Load Disconnect feature.
More information about the functionality of these screens can be found in The
MANAGER instruction manual.
29

Redarc MANAGER 30 Specifications

General

Battery Charging Capacity	30A
Input Voltage Range	9-32V DC
Output Voltage	12V DC
Standby Current Draw	<100mA
DC Input Fuse Rating	40A
Efficiency	Up to 95%
Battery Types	AGM, Gel, Calcium, LiFePO4
Protection Features	Over-voltage, under-voltage, over-temperature, short-circuit, reverse polarity