To Next PageTo Next PageWhat to do if my Redlion RJS-PREM Water Pump fails to deliver water?
If your Redlion Water Pump isn't delivering water, several factors could be at play. First, ensure the pump is completely primed. If the suction lift is too high, relocate the pump closer to the water source. Also, check the foot valve to ensure it is submerged and not obstructed by mud or other debris; clean or replace it if necessary.
How to troubleshoot a Redlion Water Pump motor that will not start?
If the motor of your Redlion Water Pump won't start, begin by checking all electrical connections to ensure they are secure and inspect the breaker and fuses. Also, make sure the pump pressure switch is closed.
Why does my Redlion RJS-PREM keep losing prime?
If your Redlion Water Pump loses prime, check for air leaks in the suction line and repair or replace as needed. If the well draws down too far, move the pump closer to the water source. Also, inspect the foot valve and clean or replace it if faulty.
Why does my Redlion RJS-PREM start and stop too often?
If your Redlion Water Pump starts and stops too often, it could be due to a faulty air volume control, which would require replacement. Alternatively, there might be air leaks in the tank above the water level; check the fittings and consider replacing the tank. Another cause can be incorrect setting on the pressure switch.
What to do if my Redlion RJS-PREM delivers water, but not at rated capacity?
If your Redlion Water Pump delivers water but not at its rated capacity, there are several potential causes. Check for leaks in the suction or discharge lines, and clean or replace them as needed. Inspect the foot valve, suction line, impeller, or nozzle for partial blockages and clean as necessary. If the suction lift is greater than recommended, relocate the pump closer to the water source. Ensure the proper gauge wire has been used and verify that the motor is wired for the correct voltage, matching the voltage at the power source.
Details pump model, item number, HP, voltage, and current ratings for different models.
Covers hazards like explosion, fire, electric shock, high voltage, and bodily injury.
Illustrates common plumbing system arrangements for shallow well jet pumps.
Guidance on selecting a clean, dry, ventilated location for the pump.
Details on connecting plumbing, pressure relief valves, and gauges.
Instructions for wiring, changing voltage, and ensuring proper grounding.
Step-by-step guide to prime the pump using an in-line check valve.
Step-by-step guide to prime the pump using a foot valve.
Tasks include checking foundation, leaks, performance, and cleaning.
Instructions for draining the pump and system for cold weather or maintenance.
Detailed disassembly and reassembly steps for replacing pump seals.
Lists common issues like motor not starting, pump losing prime, and capacity problems.
Diagram and list of parts with corresponding item numbers and order numbers.
General| Brand | Redlion |
|---|---|
| Model | RJS-PREM Series |
| Category | Water Pump |
| Language | English |
