English
EN
OWNER'S MANUAL
RL-MPDP Drill Pump Kit
This pump is designed to be used with a drill (1200 RPM
or higher) for liquid transfer applications and household
water removal.
Do NOT use this pump for:
• Gasoline or other highly flammable liquids
• Liquid above 110 °F (43 °C)
• Transferring potable water
• Effluent or sewage applications
• Applications where debris (gravel, sand, etc.), abrasives, or corrosives are present
• As a pond pump, or for pumping seawater
• Locations classified as hazardous according to the National Electrical Code (ANSI/NFPA)
The drill pump kit is equipped with:
• Drill pump
• One 32 in (813 mm) x 3/4 in garden hose with FGHT brass coupling
• One 32 in (813 mm) x 1/4 in diameter tube with 3 in x 1/4 in adapter (packaged inside the garden
hose)
This product is covered by a Limited Warranty for a period of 90 days from the date of original purchase by
the consumer. For complete warranty information, refer to www.RedLion.com
; or, call Technical Support for
a printed copy.
Specifications
Model
Item
Number
Discharge Inlet Size
Pump
Housing
Volute Impeller Shaft Seal
Motor
Shaft
RLMPDP-
KIT
14942022 3/4” MGHT
3/4” MGHT
and 0.39”
I.D.
Plastic Buna
Stainless
Steel
To Next Page
Need help?
General
