avoid the accident.
When machine lifting, prohibit to cling to the machine and also prohibit to cling to
the hanger and rope in order to avoid the accident .
Attention Items
When machine lifting and handling, please note whether there is an barrier or person
around the machine, please clean the barrier and let people leave before hanging. To
avoid the collision and danger.
When machine is lifting and handling, control the speed not too fast, should forbid
the urgent brake, in order to avoid the machine shaking to lose balance and fall down.
1.1.4 Electrical Safety
Before wiring，be sure to turn off the power.
Electronic components inside the device are particularly sensitive to static
electricity ,so please don’t put the foreign body inside the equipment or touch
the main circuit board.
AC off , the device 's internal drives, motherboards, laser power indicator
light does not go out it shows that high pressure inside the device is still very
dangerous , do not touch the internal circuits and components.
Please use the power which is same as the rated voltage frequency.
Must install the power stabilizer, when the grid voltage exceeds the rated voltage ±
10%, should not turn on the machine.
Please confirmed all wires insulation is under the good condition, avoid the leakage
and electric shock.
To Next Page
Loading...
