Please check and make sure all indicators for accessories are working properly.
Be sure the machine enclosure right grounding use of range.
1.1.5 Mechanical Safety
After unpacking, firstly you must check the equipment is intact after long transportation.
Turn on the machine when the first time or when stopping using for a long time, please
check if there is interfere in all axis, then lubricate the machine fully before you run the
machine.
Before turn on the machine, please must check whether there are more than 2/3 coolant
in the cooling tank (distilled water or purified water), when the water circulation inside the
laser tube is normal, you can run the laser.
1.2 Safety Signs
For the security part in this User Manual, take the following mark, the statements about
safety signs is very important, please be sure to observe! To avoid the people’s injury and
machine’s damage.
Danger Potentially dangerous situation, it will be happened under the wrong
operation.
Attention Potentially dangerous situation, it will cause the low-grade injury or
middle-grade injury.
Forbid Forbid (Never do)
Force Force(Must do)
To Next Page
Loading...
