Redsun PF2100 - G. SETTING THE CLOCK; SELECTING LOCAL; WORLD TIME; SETTING LOCAL TIME; SETTING WORLD TIME

14
G. SETTING THE CLOCK
1. SELECTING LOCAL / WORLD TIME
 This radio can display the local time or world time.
 Press the LOCAL / WORLD TIME button (9) will display local time or
world time.
 Press the LOCAL / WORLD TIME button (9) for 5 minutes to change
the Local / World time mode.
2. SETTING LOCAL TIME
 Press the LOCAL / WORLD TIME button (9) to select local time.
 Press the MEM button (17) until the time flashes on the LCD panel.
 Press the UP button (13) to select adjustment for hour; press the UP
button (13) for a longer while to increase the hour, or rotate the
TUNING knob (23) to increase or decrease the hour.
 Press the DOWN button (15) to select adjustment for hour; press the
DOWN button (15) for a longer while to increase the hour, or rotate
the TUNING knob (23) to increase or decrease the hour.
 When the desired time reading is reached, press the MEM button (17)
again to confirm, the clock is now set.
3. SETTING WORLD TIME
 Press the LOCAL / WORLD TIME button (9) to select world time.
 The other steps are the same as setting local time, as items 2 – 5
above.
4. 12 / 24 HOUR MODE
 Press the UP button (13) for 5 seconds to change the 12 / 24 hour
mode.
 When the 12-hour mode is selected, “AM” or “PM” will be displayed
on the LCD panel.