Redsun PF2100 - SEARCHING & SAVING RADIO STATIONS TO MEMORIES; TURNING OFF THE RADIO

8
4. SEARCHING & SAVING RADIO STATIONS TO MEMORIES
4.1 Manual Search
 Use the TUNING Knob (23) to tune to a radio station either by slow or
fast speed, or
 Use the UP (13) OR DOWN (15) button to search for a station.
 This radio uses the PLL mode, all frequencies will not drift.
4.2 Automatic Search
When the radio is being turned on, press the UP (13) or DOWN (15)
button for a longer period of time, the radio will search for the strong signal
stations. When such a station is found, the automatic search will cease.
4.3 Selection of Memory Pre-Sets
 This radio can store up to 50 memory pre-sets: 10 for each band.
 When the radio is being turned on, press the MEM button (17).
 The “PRESET” sign will flash and display on the LCD panel, the radio
is not in the save memory mode.
 Press the UP (13) or DOWN (15) button to select a suitable address
from 1 to 10.
 Press the MEM button (17) to save the frequency to the selected
address.
 To retrieve the memory pre-sets, press MEM button (17) button
followed by pressing the UP (13) or DOWN (15) button. The saved
memory pre-sets can be retrieved in sequence.
5. TURNING OFF THE RADIO
Press the POWER / SLEEP Button (8) when the radio is being turned on,
the radio will be turned off and the digital time clock will appear on the LCD
panel.