06
Mounting the rear camera
How to install the rear camera
We recommend installing the rear camera outside the car (above the
license plate). The effect of the rear camera inside the car may be
affected by the windshield.
1. Tear off the 3M adhesive of the rear camera (if you need to adjust
the angle of the camera, please stick the 3M adhesive on the iron
plate, if you don't need to adjust the angle, please stick it on the top
RIWKHUHDUFDPHUDDQGWKHQŵ[WKHUHDUFDPHUDLQWKHPRVWVXLWDEOH
position above the licence plate.
Rear Camera Upgrade
New rear camera comes with a mounting bracket which supports
both interior and exterior installation.
Adjustable angle
or
Inside the car bracket
Outside the car bracket
Fixed angle, not adjustable