To Next PageTo Next Page
Need help?Do you have a question about the Reebok 1000 Zx Elliptical and is the answer not in the manual?
General| Drive System | Front Drive |
|---|---|
| Resistance Levels | 16 |
| Display Type | LCD |
| Programs | 12 |
| Type | Elliptical |
| Stride Length | 18 inches |
| Flywheel Weight | 18 lbs |
Covers consulting a physician, proper posture, stopping if unwell, and safe interaction with the machine.
Details requirements for assembly, including needing two people, necessary tools, and checking for pre-assembled parts.
Step-by-step instructions for securing the front stabilizer to the elliptical frame using specific hardware.
Guides on attaching the rear stabilizer, center foot, ramp housing, and connecting the ramp to the frame.
Provides instructions for connecting the pedal arms, pedals, and rear ramp housing to the elliptical structure.
Details the process of attaching the upright post and connecting wire harnesses, with a caution against wire damage.
Instructions for attaching the left and right PSC (Personalized Support Control) arms to the corresponding PSC legs.
Guides on greasing and installing the left and right linkage arms, connecting them to pedal arms and PSC legs.
Completes linkage arm attachment and advises on final checks, including power cord connection and cold storage precautions.
Explains safe electrical connection to a grounded outlet, warnings about adapters, and the importance of proper grounding.
Details how to use the one-touch buttons to change pedal resistance and ramp incline during a workout.
