REED 5A - Tonearm Assembly Steps

Figure 1
1. Tonearm assembly
a) Unpack box contents (Figure 1).
Please read the User Manual before starting
to assemble tonearm. Not following
assembly instructions may permanently
damage the tonearm.
Figure 2
b) Remove the top packaging layer.
c) Take out the template [2], a counterweight
[3], all the accessories [4] and the top
bearings [5] (Figure 2).
Figure 3
d) Take out the tonearm parts: tonearm body
[6], armwand [7], front link [8] and
tonearm frame with lever [9] (Figure 2 and
Figure 3).
1
2