REED SD-2010 - User Manual

Model
Heat Stress
Meter and
Datalogger
SD-2010
reedinstruments
www
com
Instruction
Manual
Pantone 534 Blue
Pantone 123 Yellow
Pantone 485 Red
Pantone 123 Yellow
Pantone 534 Blue
Black
Rich Black -
20/20/20/100
Blue - 100/80/30/5
Yellow - 0/27/100/0
Red - 10/100/100/5
Yellow - 0/27/100/0
Blue - 100/80/30/5
Only if you REALLY need them:
Pantone 534 Blue - 100/80/30/5
Pantone 485 Red - 10/100/100/5
Pantone 123 Yellow - 0/27/100/
INSTRUMENTS
www.reedinstruments.com
1-877-849-2127 | info@reedinstruments.com

REED SD-2010 Specifications

General

Type	Sound Level Meter
Frequency Range	31.5Hz to 8kHz
Power Supply	9V battery
Data Hold	Yes
Accuracy (dB)	±1.5 dB
Display	LCD

Summary

Instrument Description

Operating Instructions

Function Selection

WBGT Measurement

Measure Wet Bulb Globe Temperature (WBGT) for indoor or outdoor conditions.

WB Measurement

Measure Wet Bulb (WB) temperature using the meter.

Dew Point Temperature Measurement

TG Measurement

Humidity and TA Measurement

Data Record (Max., Min. Reading)

Datalogger Preparation

Prepare for and understand the datalogging function with SD card.

Auto Datalogger Operation

Start, pause, and stop automatic data logging with a set sampling time.

Manual Datalogger Operation

Perform manual data logging by setting sampling time to 0 seconds.

Data Transfer to Computer

Advanced Settings

Set Clock Time

Set WBGT Alarm Value

Configure the WBGT threshold for audible alarm activation.

Set Sampling Time

SD Memory Card Format

PC Serial Interface

Battery Replacement