REED SD-2010 User Manual

reedinstruments
www
com
7
Pantone 534 Blue
Pantone 123 Yellow
Pantone 485 Red
Pantone 123 Yellow
Pantone 534 Blue
Black
Rich Black -
20/20/20/100
Blue - 100/80/30/5
Yellow - 0/27/100/0
Red - 10/100/100/5
Yellow - 0/27/100/0
Blue - 100/80/30/5
Only if you REALLY need them:
Pantone 534 Blue - 100/80/30/5
Pantone 485 Red - 10/100/100/5
Pantone 123 Yellow - 0/27/100/
INSTRUMENTS
Function selection
1) Turn on the meter by pressing the Power Button. To turn the meter
off, hold the Power Button for over 2 seconds.
2) The meter has 5 measuring functions to choose from: WBGT,
WB, Dew Point, measurements, TG, Humidity measurements, Air
Temperature. When the meter is on, press and hold the Function
Button. The display will ash “_bgt” for WBGT measurements, “_b”
for WB measurements, “dP” for Dew Point measurements, “tg” for
TG measurements, “rH” for Humidity measurements, and “tA” for
Air Temperature measurements. Release the Function Button to
choose the displayed function.
WBGT Measurement
1) Turn on the meter by pressing the Power Button. To turn the meter
off, hold the Power Button for over 2 seconds.
2) Function select to “_bgt”. The upper Display will show the WBGT
value. The lower Display will show the text “_bgt in” for indoors,
or “-bgt out” for outdoors. While taking a measurement, press and
hold the In/Outdoor Button to scroll between Indoor or Outdoor
measuring. Release the IN/Outdoor Button to make your selection.
3) To set the WBGT alarm, please see the Advanced Settings section.
WB Measurement
1) Turn on the meter by pressing the Power Button.
2) Function select to “_b”. The upper Display will show the WB value.
The lower Display will show the text “_b”.
Dew Point Temperature Measurement
1) Turn on the meter by pressing the Power Button.
www.reedinstruments.com
1-877-849-2127 | info@reedinstruments.com

REED SD-2010 Specifications

General

Brand	REED
Model	SD-2010
Category	Measuring Instruments
Language	English