ton scroll through eight main functions, shown on the lower display:
dAtE Set clock time (Year/Month/Date, Hour/Minute/Second)
AL SET WBGT Alarm Value
dEC Set SD card Decimal character
PoFF Auto power OFF management
bEEP Set beeper sound ON/OFF
t-CF Select the temperature unit to °C or °F
SP-t Set sampling time (Hour/Minute/Second)
Sd F SD memory card Format
While in the “Advanced Setting” function, press the Esc Button to exit and
to return to normal functioning.
Set Clock Time
1) When the lower display shows “dAtE”, press the Enter Button.
Use the Up and Down Buttons to adjust the Year. After the desired
value is set, press the Enter Button to adjust the Month, Date, Hour,
Minute, and Second values.
2) After all the time values have been set the screen will jump to “SD
card Decimal character” setting screen. To exit “Advanced Set-
tings”, press the Esc Button.
Note: After the time value is set, the internal clock will run even when the
power is off, if the battery is under normal conditions.
Set WBGT Alarm Value
1) When the lower display shows “AL”, use the Up or Down Buttons
adjust the WBGT Alarm value. If the WBGT measurement is above
the alarm setting, a buzzer will sound.
www.reedinstruments.com
1-877-849-2127 | info@reedinstruments.com
To Next Page
Loading...
Need help?
General
