Reef Factory Thermo control User Manual

4. Set up a Wi-Fi connection to your home router.
Enter the exact Wi-Fi network name of your home router.
Then enter the password for your home router, if required,
and press “NEXT”.
Pay attention to uppercase and lowercase characters.
NOTE: Special characters may not be supported if the name
or password for your router contains such characters,
change them in your router's settings.
NOTE: Reef Factory devices only support the 2.4 GHz Wi-Fi
network band. If your router generates 2.4 GHz and 5 GHz
bands, indicate the name of the 2.4 GHz network.
Select “SCANNING” to scan the QR code on
the device, then allow the Smart Reef app to
access the camera while using the app.
After pressing “SCAN”, hover your phone's
camera over the QR code to scan it, or
manually enter the device's serial number
and select “CONNECT”.
You can find the serial number on
the device, on the packaging and as
the generated Wi-Fi network.
The serial number starts with RF, an
abbreviation of the device name, and
a string of digits.
Manual Thermo control © Reef Factory 2023
7

Reef Factory Thermo control Specifications

General

Brand	Reef Factory
Model	Thermo control
Category	Thermostat
Language	English