What to do if Reer 50080 has constant low battery indicator?
If your Reer Baby Monitor shows a constant low battery indication, it could mean that the parent unit's batteries are empty. Try charging the parent unit using the charging cable supplied. Alternatively, the batteries in the baby unit might be empty, so replace them or connect the mains adapter.
Why does my Reer 50080 have a constant range alarm?
A constant range alarm on your Reer Baby Monitor could be due to several reasons. First, the baby unit might be switched off or have no power. In this case, switch on the baby unit or test the power supply. Second, the distance between the units might be too great; try reducing the distance. Finally, the coupling could be faulty; try recoupling the devices.
How to fix Reer 50080 Baby Monitor with range too small?
If the range of your Reer Baby Monitor is too small, there might be too much signal interference between the units. Try repositioning the baby and parent units. Also, check if the baby unit's battery is empty and change it if necessary.
What to do if Reer 50080 Baby Monitor has no transmission from baby unit?
If there is no transmission from the baby unit of your Reer Baby Monitor, it could be because the microphone sensitivity is too low. Adjust the sensitivity in the menu. Alternatively, there might be no power supply to the baby unit. Check the power supply and replace the batteries if necessary.
How to fix Reer 50080 Baby Monitor with battery running out too quickly?
If the battery of your Reer Baby Monitor runs out too quickly, it might be because the projection and music playback are constantly activated. Try switching off these features or switch to VOX mode. Also, check if the vibration mode is activated and switch it off if it is.
What to do if Reer Baby Monitor has no connection between the units?
If there is no connection between the units of your Reer Baby Monitor, it may be due to a coupling error. Try recoupling the devices.
Why does Reer 50080 have permanent transmission?
Permanent transmission on your Reer Baby Monitor usually means the microphone sensitivity is too high. Adjust the sensitivity in the menu.
Why does my Reer Baby Monitor have a constant temperature alarm?
A constant temperature alarm on your Reer Baby Monitor indicates that the minimum and maximum temperature limit values are too close to the current recorded temperature. Set the limit values to within approximately 5° of the current measured temperature.
Essential safety guidelines for using the baby monitor.
Guidelines for safely installing and positioning the baby monitor units.
Solutions for transmission, power, and range issues.
Resolving alarm, low battery, and connection errors.
Essential safety guidelines for using the baby monitor.
Guidelines for safely installing and positioning the baby monitor units.
Solutions for transmission, power, and range issues.
Resolving alarm, low battery, and connection errors.
The reer projector baby monitor, item no. 50080, is a sophisticated device designed to provide parents with peace of mind by monitoring their baby. This system consists of two main units: a baby unit (transmitter) and a parent unit (receiver), both engineered for clear and reliable communication.
The primary function of the reer projector baby monitor is to transmit sounds made by the baby to the parent unit, ensuring parents are alerted to their child's needs. It incorporates modern FHSS technology, which guarantees interference-free transmission and a secure, private connection between the units. Beyond basic sound monitoring, the baby unit features an integrated star projector and a lullaby function, designed to soothe the baby. The parent unit includes an intercom function, allowing parents to speak to and calm their child remotely. An in-built temperature sensor in the baby unit measures the ambient room temperature, which is then displayed on the parent unit, providing an additional layer of monitoring. The device is suitable for both stationary and mobile use, thanks to its optional battery operation.
The parent unit is the control center for parents. It features a clear display and several intuitive controls.
The baby unit is placed near the baby and is equipped with features to monitor and soothe the child.
The reer projector baby monitor is designed for ease of use and reliability, providing parents with essential monitoring capabilities and comforting features for their baby.
General| Type | - |
|---|---|
| Lullabies | Yes |
| Maximum range | 650 m |
| Built-in camera | No |
| Channels quantity | 1 channels |
| Number of lullabies | 6 |
| Battery type | AAA |
| Battery voltage | 3.7 V |
| AC input voltage | 100 - 240 V |
| Battery capacity | 750 mAh |
| AC input frequency | 50 - 60 Hz |
| Battery life (max) | 57 h |
| Transmitter power source | AC, Battery |
| Number of batteries supported | 3 |
| Cables included | USB |
| Operating temperature (T-T) | -10 - 50 °C |
| Product color | White |
To Next Page
