To Next PageTo Next PageWhat to do if Reer Baby Monitor parent unit always shows low battery?
If your Reer Baby Monitor parent unit constantly indicates a low battery, it could be due to two reasons: either the built-in battery is empty, in which case you should charge the parent unit with the supplied charging cable, or the battery is damaged and needs replacement with a new one.
Why does my Reer Cosmo 50150 Baby Monitor have a constant range alarm?
A constant range alarm on your Reer Baby Monitor can occur due to several reasons: the baby unit might be switched off or have no power, so switch on the baby unit or test the power supply; the distance between the units might be too large, so reduce the distance; or the coupling is faulty, so carry out the coupling again.
What to do if Reer Baby Monitor has excessive static and interference?
Excessive static and interference in your Reer Baby Monitor might be caused by the baby unit being near other electrical equipment. Try removing the other electrical equipment or repositioning the baby unit.
Why is the range too small on my Reer Cosmo 50150 Baby Monitor?
If the range of your Reer Baby Monitor is too small, it may be due to excessive signal interference between the two units. Try repositioning the parent and baby unit.
Why is my Reer Baby Monitor in constant transmission mode?
Constant transmission in Reer Baby Monitor may happen because the microphone sensitivity is too high, so adjust the sensitivity with the Decrease Microphone Sensitivity button. It might also happen if continuous operation of the parent unit is activated without Auto-Off.
General| Brand | Reer |
|---|---|
| Model | Cosmo 50150 |
| Category | Baby Monitor |
| Language | English |
Details the contents of the baby monitor package, including cables and adapters.
Lists technical specifications of the reer Cosmo baby monitor, such as frequency and power.
Important warnings and guidelines for safe operation and handling of the baby monitor.
Safety advice for proper placement and installation of the baby monitor units.
Details the physical parts and functions of both the parent and baby units.
Step-by-step instructions for initial setup, charging, and pairing.
Explains core features and modes like VOX, ECO mode, and intercom.
Guidance on proper cleaning methods and general maintenance for the unit.
Solutions for common issues like reception problems, static, and battery life.
Details warranty claims and environmentally friendly disposal of the product.
