EasyManua.ls Logo

Reer Cosmo 50150 - Technical Data and Safety Guidelines; Technical Data; General Safety Instructions; Safety Instructions for Installation

Reer Cosmo 50150
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Technology
Digital FHSS
Frequency
865 MHz
Baby unit / Transmitter
Power supply with mains adapter or optionally with 3 AAA alkaline batteries (not included in delivery).
Parent unit / Receiver
Power supply with mains adapter or optional 3.7 V 600 mAh Li-polymer battery/rechargeable (integrated
in parent unit)
Input
100 – 240 V / 50 Hz / 0.15 A max.
Output
5 V / 600 mA max.
Transmitter power
TX: 5,47 dBm / RX: 7,65 dBm
Range
Up to 600 m
Cable length
1,50 m
Operating temperature
-9°C – +50°C
Maximum battery life of the parent unit
(display; on stand-by)
Up to 60 hours
Technical data
General safety instructions
! Check the unit for visible damage before each use. If you detect any damage, do not use the unit.
! Only use the supplied chargers and mains adapters. Make sure that the operating voltage of the power outlet matches that of the mains adapter. Check - especially
when travelling abroad - that the local mains voltage matches the voltage specified on the units and/or mains adapters.
! Except for the battery compartment cover, never open the units or mains adapters, as there is a risk of electric shock. If a unit does not work correctly, please do
NOT try to fix the problem yourself. Please contact your dealer in the case of any problems.
! Avoid bringing the battery and/or electrical connection contacts on the units into contact with metal objects.
! This product is not a toy! Do not allow children to play with the unit.
ATTENTION!
This baby monitor was designed exclusively for monitoring your baby. It may neither be regarded as a substitute for parental supervision nor as a
medical device.
Safety instructions for installation
! Always place the baby unit out of your child´s reach (minimum distance: 1 meter).
! Never place the baby monitor inside the crib, cot or playpen.
! The power lead must be secured out of the reach of children to avoid any risk of strangulation. Do not use extension cables.
! To ensure optimal transmission, the units must be kept upright at all times and placed in an elevated position.
! DO NOT place the receiver in the vicinity of radio transceivers or microwaves. Radiant emissions from these devices can significantly affect radio reception.
! Do not use the units near water or in humid places. Do not submerge the units in water.
! Do not rinse the units under running water.
! Do not cover the baby monitor with towels, clothes or blankets.
! Avoid extreme heat and direct sunlight
! The socket used for connecting the mains adapter must be located close to the baby monitor and kept freely accessible at all times.
! Disconnection from the mains supply is only allowed if the mains adapter is disconnected from the power socket.
2

Table of Contents

Related product manuals