Reflex ex separator — 21.11.2016 English —
EU-Declaration of conformity of Reflex Ex-Separators
Design – Manufacturing – Product Verification
This declaration of conformity is issued under the sole responsibility of the
manufacturer.
Air and Dirt Ex-Separators
Exvoid, Exvoid T, T Solar, Solar, HiCap / Exdirt, Exdirt M, HiCap / Extwin, Extwin M
universally applicable in heating, solar and cooling systems
type according to name plate of vessel
Serial no. according to name plate of vessel
Year of manufacture according to name plate of vessel
max. allowable pressure (PS) according to name plate of vessel
Test pressure (PT) according to name plate of vessel
min. / max. allowable temperature (TS) according to name plate of vessel
max. continious operating temperature according to name plate of vessel
Operating medium Water
The conformity of the product described
above with the provisions of the applied
Directive(s) is demonstrated by compliance
with the following standards / regulations:
Pressure Equipment Directive, AD 2000 according to name plate of vessel
The manufacturer herewith declares that Ex-Separators of the type Exvoid, Exdirt
und Extwin are designed and manufactured in accordance to the directive
2014/68/EU article 4 paragraph 3 listed requirements of the sound engineering
practice of the member States.
The chosen technical specification for the fulfillment of the basic safety requirements
of the directive 2014/68/EU are according to the name plate of the separator.
Signed for and on behalf of
Manufacturer
Gersteinstraße 19
59227 Ahlen - Germany
Telefon: +49 2382 7069 -0
Telefax: +49 2382 7069 -588
E-Mail: info@reflex.de
Ahlen, 19.07.2016
Norbert Hülsmann
Volker Mauel
Members of the Management
The respective statutory guarantee regulations apply.
Cooke Industries - Phone: +64 9 579 2185 Email: sales@cookeindustries.co.nz Web: www.cookeindustries.co.nz
To Next Page
Loading...
Need help?
General
