RefPlus Opti-Mist Plus - Start-Up Report Form

FILL OUT FORM MANUALLY, TAKE A PHOTO
AND SEND TO:
service@refplus.com
ONLINE FORM
OR
13
R
START-UP REPORT FORM
ADIABATIC SYSTEM
STARTUP REPORT FORM
IMPORTANT: This startup report form must be lled out, signed and sent to RefPlus for the warranty to be honoured.
PRE-START-UP (Check each item when completed, as recommended in this manual.

CHECK WATER SUPPLY (FOR CONNECTION AND PRESSURE)

CHECK AIR VENT (PROPER CONNECTION)

CHECK ATOMIZING NOZZLES FOR LEAKS (PROPERLY TIGHTENED)

CHECK PULSING VALVE FOR PROPER OPERATION

CHECK FILTER (PROPERLY IN PLACE)

CHECK ADIABATIC PUMP CURRENT CONSUMED
WATER SUPPLY PRESSURE
PSIG UNIT VOLTAGE
PUMP OUTLET PRESSURE PSIG
NAME OF INSTALLATION
TECHNICIAN: _____________________________________ SIGNATURE: _____________________________________________________