Rega Brio 3 User Manual

Contents
Introduction..................................................................1
Installation........................................................................2
Input Connections...........................................................3-5
In Use.................................................................................5
Specifications.................................................................6
Troubleshooting.......................................................7-11
Brio 3 Manual (full).qxd 08/06/2006 16:27 Page 1

Rega Brio 3 Specifications

General

Type	Integrated Amplifier
Power Output	49 watts per channel (8 ohms)
Inputs	5 Line Level, 1 Phono
Phono Stage	Yes, MM
Input Sensitivity	150mV (line), 2.5mV (phono MM)
Input Impedance	47kΩ (line), 47kΩ (phono MM)
Signal to Noise Ratio	80dB Line, 78dB Phono
Weight	6.0kg