2
Installation
The Brio
3
will work well on most surfaces, such as a shelf or table,
provided there is sufficient air around the amplifier to prevent
overheating. To avoid magnetic interference, site the amplifier as far
away from the turntable as the tone arm lead will allow. If possible,
place it to the left of the turntable. Keep other equipment, such as
tuners, cassette decks or CD players away from the amplifier. Never
stack other hi-fi equipment on top of the amplifier.
Ventilation
The heat produced by the Brio
3
is dispersed to the air by the case,
particular from the base. Ensure that the case has an unobstructed
air passage around it. Never place the amplifier on carpet, rugs,
bedding, or other hi-fi equipment.
To Next Page
Loading...
