Engine & Controls
1-49
1
2
3
5
4
Typical Fuel Tank- Note that fuel tanks feature aluminum or polyester material
1) Fuel Sender 4) Fuel Feed Line
2) Anti Siphon Valve 5) Fuel Fill Line
3) Fuel Vent Line
ENGINE LUBRICATION SYSTEM
Whenever two components rub together, friction causes wear
on both components. To minimize the wear on your engine, a
lubrication system has been put in place to help components slide
next to each other easier. is is particularly important within
the inner workings of an engine. It is important to ensure your
lubrication system is working properly at all times.
Your Regal utilizes lubrication and uids that need regular check
ups. ese engine uids include engine and gearcase oil along with
steering uids. Refer to your outboard engine owner’s manual for
speci c details regarding the proper maintenance procedure of
your lubrication system. e pictures displayed in this section may
represent a di erent engine model than your vessel.
To Next Page
Loading...
